Paint your fridge with chalk paint!

 Paint your fridge with our simple DIY. Ugly appliances don’t have to ruin your kitchen’s style. All it takes is a little paint and some creativity!

Whether you love to renovate or absolutely hate it, we all know that renos can be very expensive, especially when it comes to the kitchen. As much as I would love to own a matching set of the latest appliances with all their bells and whistles, I know in my deeply frugal heart that it just isn’t going to happen anytime soon (if ever).

Just because I am too cheap to buy the latest and greatest doesn’t mean that I have to be stuck with an ugly fridge until it inevitably dies. I realized that just because I don’t want to spend the money to replace my fridge doesn’t mean I have to accept it the way it is. Just like the DIY diva I am, I decided to start researching the best ways I can make it better without spending a lot of cash.

Great brand, ugly fridge

The Perfect Paint for Your Fridge

I discovered that Rustoleum makes a paint specifically for appliances! While I loved that I was not the only one crazy enough to try to paint their fridge. I actually saw some beautiful paint jobs that not only inspired me but made me excited to take the next step in my kitchen renovation.

All you Need:

  • Rustoleum appliance paint (one bottle was enough for my fridge and dishwasher)
  • Rustoleum chalk paint (I used country grey)
  • Chalk paint wax
  • Painters tape
  • Drop sheet
  • Paintbrushes

Before you paint:

The first thing that I did was give the fridge a good scrubbing. If your family is anything like mine, your fridge is a disgusting trap for sticky drips and messes from little hands all over it day and night.

Once I scrubbed off most of the grime, I took the time to tape off any area that I didn’t want to be painted. My fridge had some stainless steel accents and an LG sign I didn’t want to cover.

I didn’t use a drop sheet because I knew I was planning on painting the floor as part of my kitchen renovation, but if you aren’t changing your floor, a drop sheet is a must. I found that using a spray paint really caused a lot of splatter on my floor. Luckily for me, the splatter could not wreck my extremely ugly floor.

I also painted my dishwasher as part of this project. For the dishwasher, I made sure to also cover up the surrounding cupboards. The layout of my kitchen leaves my fridge off on its own so I didn’t have to worry about the surrounding area.

Time to paint!

After I had gotten the fridge nice and clean (and it was dry) I painted on the appliance paint. I tried to do it according to the directions on the can, but they suggested taking the fridge outside to spray it and there was no way that was going to happen. Instead I just turned off the heat and opened every window in the hopes I wasn’t about to ruin too many brain cells.

Bright white and new

Just this first step made the fridge look so much better. I actually considered stopping at this step because it looked so fresh and clean. I took 24 hours to let the paint dry and consider. After painting the dishwasher and loving it, I decided just to go for it and I am certainly glad I did.

I love how this came out.

When using chalk paint make sure to use an even up and down application. I suggest leaving on the painter’s tape until the project is finished.

A fridge that has been painted with grey chalk paint
AFTER!!!

Once I was satisfied that my paint was applied evenly, I let it dry for 24 hours and then applied a coat of wax (or two) to seal it.

This whole project cost me a can of appliance paint (about $12) and part of a can of chalk paint and wax (about another $12). So for less than $25 I transformed two appliances and saved them from the landfill!

If you like this DIY, why not check out my full kitchen renovation which costs less than $150?

Extreme Kitchen Makeover for under $150

Don’t let a small budget stop you from beautiful design! Check out the kitchen renovation that we managed for under $150!

When my husband and I purchased our first home, it was a complete fixer upper. We spent six years renovating including gutting our kitchen all the way to the studs as well as replacing the floor twice. All of this was while we had three small kids under four. 

It was basically a hot mess nightmare.

So imagine my surprise when we started searching for our forever home and my husband fell in love with yet another fixer-upper. Specifically, one that needed a complete kitchen renovation.

Knowing how much work and cost that goes into a complete gut job, I decided to start thinking about what could be done in the meantime on a shoestring budget.

Kitchen Makeover Before and After

After all, the kitchen is functional, just really ugly. I needed to make it look better, not necessarily function better. I decided to visit some of my favourite places for inspiration-Pinterest and Varage Sale.

I am completely obsessed with Varage Sale and I love using it to get great quality used goods at deep discounts.

Varage Sale lets you follow certain boards so you can get alerts when new items are added. You can also ‘watch’ items to be alerted if they lower in price. I like visiting the home renovation material category quite often and I stumbled across a great deal on white paint, which inspired my kitchen renovation.

I was able to secure a deal of four litres of paint for $10. All the paint was Sherman Williams, so I knew it was high quality. There were two full and one half full tubs of ‘bright white’ and one full can of ‘cloud white’. 

I wasn’t super fussy with the exact shade of white for the cupboards. Since they had already been painted a creamy beige, I knew that any shade of white would brighten the room. I also did not worry about sanding or priming since the cupboards already had been painted by the previous owners.

Painting the cupboards was a big job but there is just something so satisfying about painting something bright white and making it shiny and new.  With each brushstroke I could tell that my kitchen was going to look bright, clean and fresh. It made it so worth it. 

When painting, I always try to keep my brush strokes even and my coats light. I hate seeing drips and inconsistency in painting. These cupboards had previously been painted badly so they needed lots of coats to even them out and get a nice finish. 

I made sure to take the time to remove the cupboard doors to really do a nice finish. Do it once and do it right! 

A Kitchen Makeover on a Budget

I decided to change the hardware on the upper cupboards only. I think that this is a great way to save money if you want a change without breaking the bank. I wanted to do something a little fun and different so I ordered these yellow birds online from Aliexpress. 

Ordering from China directly was a great move for me because it saved me quite a bit of money and gave me about five weeks to get my nerve up to start this project! 

Taking on the fridge

My next step was to take on painting my fridge and stove with chalk paint. Take a look at how I took on the challenge here.

DIY Countertops

The countertops in my kitchen were always a point of contention for me. They seemed to have some hints of orange and pink mixed in and it just screamed ‘1991’. I really wanted to get rid of it. 

I researched different DIY methods. I had seen lots of videos where countertops were painted, but I was hesitant to add chemical paint to a food prep area. 

I stumbled upon some contact paper specially made for countertops during one trip to Walmart. It was a marble design which is night and light and perfect for my decor. A single roll, (I ended up needed two with lots to spare) only cost $9.99 so it was perfect for my budget!

Contact paper can be finicky to work with. You need to make sure to get out all of the bubbles and to match your patterns and seams. The good news is that I found this contact paper to be easily repositioned. 

A Range hood Makeover

Another area I tried to makeover was my range hood. Looking  back, I would have address this first since I had to tape off the area and the paint still spilled through. 

At first, I tried to update the range hood with my leftover black heat paint from my fireplace makeover but I ended up wrecking the finish and was left with streaks and bumps.

I decided to use the Rustoleum Stone Effects since I couldn’t do a smooth finish and I love the result! It was a cheap and beautiful fix! 

How to Whitewash a Backsplash

The before and after with the countertop was really dramatic. But once the countertops were done I realized I needed to change the backsplash. As much as I loved the stone, it just no longer looked right with the counters. 

Luckily, I still had that extra can of paint from the VarageSale buy. Yes, I am that cheap that I refused to shell out extra money. I mixed equal parts water and paint and kept a rag on hand in case of any drips as I had already covered the countertops. Once again, if I knew I was going to whitewash the backsplash I would have done it before the countertops. Learn from my mistakes!

I kept my whitewash to one light coat as I wanted to see the variation in colour in the stone. The backsplash was probably my favourite part of the whole makeover. It didn’t take long, cost any extra money and looked fabulous. 

Painting the tile floor

This was by far the worst part of the whole process. My tile floors were in really terrible condition so I wasn’t too worried about wrecking them with a little paint, but the process was horrible. 

I started the process by sweeping, vacuuming, steam cleaning and hand scrubbing the floor. Once I had removed as much grime as possible I painted one thin coat of paint. 

How to buy paint for less

I had bought some pretinted paint from Walmart for the project. By choosing a pretinted colour I was able to save myself about 50 percent. The colour I choose was called Sea Spray and I choose it because it was a neutral blueish green I figured would go well with most colours. 

The hardest part of this project was keeping the floors clean between coats of paint. I have three kids, a dog and a cat. It was damn near impossible. 

Once the paint was dry (I gave it overnight) I used a stencil from the dollar store and some leftover cupboard paint to add a stencil detail. 

Once it was completely dry, I liberally applied four separate coats of Rustoleum concrete coating. I had purchased this for another project, but then decided I was actually meant to paint my kitchen floor. 

I love the way my floor turned out but it did not hold up especially well. I have touched up and added four more coats since. 

Love my kitchen hacks? Check out my fireplace makeover! 

3 Easy Ways to Carve a no-mess Pumpkin

Skip the mess with these easy DIY pumpkins that you can display all season!

It happens almost every year and yet it is always still a surprise-Halloween has snuck up on me again. Between my reno projects both inside and outside my house, my kids and my blog I have barely had time to binge on Halloween candy, let alone decorate the house. So this year, I decided that if I was going to carve some pumpkins, I wanted to do it without the stinky mess and in a way that will last more than a few days.

Reusable craft pumpkins

Indian Summer

The beginning of October had me constantly guessing between sweaters and shorts. While the timing may have been perfect for apple picking (another thing I failed to do this year) it was way too warm for pumpkins. The last thing I want to deal with is a bunch of rotten Jack O’lanterns on my porch.

Stinky smelly mess

In our modern age of store-bought pumpkin seeds, I see no reason to put myself through the torture which is known as carving pumpkins.  While I was forced to endure this torture as a kid, in my adulthood I have chosen to avoid at all costs.

As a parent, I don’t want to deprive my kids of this Halloween ritual. I have tried having my husband take the lead while I relax in another room, but I still find myself getting sick to my stomach off the fumes. In turn, my husband often finds that he is left to complete the job alone once our kids abandon the job five minutes in.

The Perfect Pumpkin

After weeks of procrastination, I discovered I waited just long enough to get a great deal on pumpkins from Micheals I had always wanted to give their artificial pumpkins a try and this seemed like the ideal year.

Originally I planned to print a stencil off the web to carve a couple of really cool designs that could be used over and over again. Once I realized that I was about to do hours of work for a few days of enjoyment, I decided to do something that I could be enjoyed for the entire Fall season instead of just a few days.

I scoured Pinterest for some inspiration and then recruited my somewhat willing husband to help. We kept one pumpkin traditional with a carved Jack O’lantern face and decided to use a drill to make patterns on the other two.

The first thing I did was draw out a pattern to follow with the drill. On one pumpkin I choose to follow the lines along the pumpkin with alternating drill bit sizes (one small, one large).

On the other pumpkin, I drew a swirling design and also used alternating drill bits to add some interest to the pattern. I found with the swirl pattern I needed to use smaller bits to make the intricate design.

Easy clean-up

Instead of a stinky, gloopy, mess, these pumpkins were easily cleaned up with our vacuum. I used a toothpick to clean up the holes and push through any hanging bits. I decided I wanted to paint the two pumpkins so I used some simple dollar store paint. I used gold on the smaller one and a mixture of white gold and pink to paint the larger one.

Once the paint had dried I used a lighter shade of gold to highlight the pumpkin’s crevices on the smaller pumpkin and to add dimension to the larger one.

I added some battery operated tealights and we were ready to celebrate! The best part is that as soon as Halloween is over I don’t have to put my pumpkins away since they are perfect as fall decor as well.

Would you ever use craft pumpkins instead of the real thing? Let me know in the comments!